Dongguan Dezhijian Plastic Electronic Ltd
Dongguan Dezhijian Plastic Electronic Ltd
Add to Cart
Matte Pla Refill Filament 3d Wax Printing Filaments 3d Pen Filament 1.75mm
Matte Pla Refill Filament is a new filament that produces a beautiful matte, low gloss finish right off the print bed. This innovative filament produces a finish unlike any other filament. PINRUI reduces the visibility of printed layer lines and gives a professional appearance to all prints.
Product Description
1. Matte effect.
2. No need hot bed: Low shrinkage effectively reduces wrapping / curling layers.
3. Wide range temperature from 190 ℃ ~220 ℃:Suitable for assorted 3D printer, Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D and etc.
4. Good toughness, High strength, High stiffness.
Product Feature
1. Recommended Extrusion Temperatures: 205±15°C
2. Recommended Bed Temperature: Not needed, but if printer has 3.heated bed, 40±15 °C
4. Spool Dimensions (Approx.): 200mm Total Diameter x 50mm Inner 5.Hole Diameter x 65mm Height
6. 1 kg spool
7. True Diameter: 1.75mm
8. Dimensional Accuracy: ±0.03mm
9. Density: 1.25 g/cm³
10. Volume: 0.80 L
11. Length: 334 m
Product Information
| Product Parameter | PLA | |
| Printing temperature | 190-220℃ | |
| Diameter | 1.75mm/3.0mm | |
| Color | more than 50 | |
| Best printing temperature | 200℃ | |
| Heating bed temperature | 60℃ | |
| Heat Distortion Temperature | 60℃ | |
| Net Weight | 1kg | |
| Gross Weight | 1.35kg | |
| Diameter tolerance | ±0.2mm | |
Storage Requirements
Store in an airtight container or bag at room temperature. ABS will absorb moisture; thereby affecting the dimensional tolerances of your 3D printer filament. Use airtight storage containers, buckets, or zip lock bags to keep the material free from humidity.
Product Advantage
Our 1.75mm and 3mm light blue Acrylonitrile Butadiene Styrene 3D printing filament for sale is inspected, tested, and confirmed to work with all FDM (Fused Deposition Modeling) 3D printers. This includes popular brands such as Printrbot, Ultimaker, Afnia, Up!, Type A Machines, Solidoodle, Flashforge, Airwolf3D, Makergear, RepRap, and Makerbot (Replicator and Replicator 2).
