Dongguan Dezhijian Plastic Electronic Ltd
Dongguan Dezhijian Plastic Electronic Ltd
Add to Cart
Clear 3d printer filament pla 1.75 mm recycled high temp High toughness Filament
PLA Silk 3D printer filaments information:
Silk PLA (Polymer Composites): Silk Pla is a typical composite material, the main components are PLA and many functional addition materials, such as polyester. There’s about 10-20% of this stuff inside. For the detail percentage, it is different among brands. These proportions of the material give the filaments glossy finish, The surface looks like silk.
Silk pla is based on pla plastic, which has the same characteristics as PLA. It can be melted and processed at high temperatures and returned to a solid state at low temperatures. Silk pla can be easily processed, such as grinding, polishing, cutting, injection and painting.
Parameter
| Filament Diameter | 1.75/mm |
| Tolerance | ±0.03mm |
| Print Temp | 190—220℃ |
| Bed Temp | 0—70℃ |
| Bed Setting | Masking tap or temperature resistant heat tape |
| Applicable Models | FDM—3D Printer |
Product Advantage:
PLA, polylacticacid, is a new biodegradable and environmentally material.The printing temperature is generally between 180-210℃, and no pungent smell when printing .It has a good anti-solvent type, good biocompatibility, gloss, transparency and heat resistance.
Quality control:
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest certificate.
2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.